HumiSeal 1B18 Aerosol Description
HumiSeal 1B18 Aerosol is a fast drying, clear acrylic conformal coating, intended for use on printed circuit assemblies. The product is conveniently dispensed aerosol cans utilizing an environmentally safe, non ODP propellant, and contains UV tracer for inspection under black light. The coating may be removed chemically using HumiSeal Stripper 1080. HumiSeal 1B18 Aerosol is RoHS Directive 2002/95/EC compliant and recognized under UL File Number E105698.
Technical data of HumiSeal 1B18 Aerosol
Property | Value |
---|---|
Solids Content, % by weight per Fed-Std-141, Meth. 4044 | 7 ± 1 % |
VOC | 687.5 grams/litre |
Drying Time to Handle per Fed-Std-141, Meth. 4061 | 30 minutes |
Recommended Coating Thickness | 25 - 75 microns |
Recommended Curing Conditions | 24 hrs @ RT or 2 hrs @ 76°C |
Time Required to Reach Optimum Properties | 7 days |
Recommended Stripper | HumiSeal® Stripper 1080, 1080EU |
Shelf Life at Room Temperature, DOM | 24 months |
Thermal Shock, 50 cycles per MIL-I-46058C | -65°C to 125°C |
Coefficient of Thermal Expansion - TMA | 67 ppm/°C |
Glass Transition Temperature - DSC | 42°C |
Modulus - DMA | 11.1 MPa |
Dielectric Withstand Voltage, per MIL-I-46058C | >1500 volts |
Dielectric Breakdown Voltage, per ASTM D149 | 6300 volts |
Dielectric Constant, at 1MHz and 25°C, per ASTM D150-98 | 2.6 |
Dissipation Factor, at 1MHz and 25°C, per ASTM D150-98 | 0.010 |
Insulation Resistance, per MIL-I-46058C | 5.5 x 10^14 ohms (550TΩ) |
Moisture Insulation Resistance, per MIL-I-46058C | 7.0 x 10^10 ohms (70GΩ) |
Fungus Resistance, per ASTM G21 | Passes |
Application of HumiSeal 1B18 Aerosol
- Allow 48 hours minimum to reach room temperature before using cans stored or received during cold weather.
- When applied in conditions of high ambient humidity, blushing (cloudy white film) may appear. Heating the coated assembly in an oven for 1/2 hour at 76°C eliminates this condition.
- Cleanliness of the substrate is extremely important to the successful application of a conformal coating. Surfaces should be free of moisture, dirt, wax, grease and all other contaminants.
- Otherwise, ionic or organic residues on the substrate could be trapped under the coating and cause problems with adhesion or electrical properties.
- The highest long term reliability for a coated printed circuit assembly will be when the conformal coating is applied over a clean, dry substrate.
- The application of conformal coatings over no clean flux is a common practice.
- The user should perform adequate testing to confirm compatibility between the conformal coating and their particular assembly materials and process conditions. Please contact HumiSeal for additional information.
- Mask areas not requiring coating overspray using suitable non-silicone masking methods or materials.
- Shake can vigorously before using and repeat frequently during use.
- Best results are obtained by spraying a distance of 30 - 40cm in light even coats. A film thickness of 25 - 75 microns is sufficient to provide protection.
- To clean nozzle after use, hold can upside down, then press nozzle for a few seconds.
HumiSeal 1B18 Aerosol Caution
- Application of HumiSeal Conformal Coatings should be carried out in accordance with local and National Health and Safety regulations.
- The solvents in HumiSeal Conformal Coatings are flammable. Material should not be used in presence of open flame or sparks.
- Use only in well-ventilated areas to avoid inhalation of vapours or spray. Avoid contact with skin and eyes.
Where to purchase authentic HumiSeal 1B18 Aerosol ?
With our reputation, Hicotech has gained the trust of many customers. Contact us now for consultation and to receive the best price for HumiSeal 1B18 Aerosol product.
Contact information:
Hotline/Zalo. 094 526 1931
Website. Hicotech.com.vn
Email: Sale@hicotech.com.vn
Có 0 bình luận, đánh giá về HumiSeal 1B18 Aerosol
TVQuản trị viênQuản trị viên